DYS XM 10A 1-3s Lipo BLheli Electronic Speed Controller

The new DYS XM10A ESCs are specially designed for high KV power racing motors. The small size and integrasted solder pads make for a cleaner and easier installation and are matched perfectly with new DYS MR/SE series brushless racing motors.

Description:

• Brand Name: DYS
• Item Name: ESC
• Item No.: XM10A
• Input voltage: 1-3s Lipo
• BEC: NO
• Signal frequency: 20-500Hz/ Oneshot125 Ultra high speed
• Firmware: BLHeli
• Type: BLHeli Bootloader & Firmware
• Size(mm)L*W*H: 23*12*4.5mm
• Weight: 4.5g

Feature: 

• XM series esc is the upgraded version from SN series with advanced processor, the basic frequency up to 50MHz and processing capacity is faster to support high KV motor.
• Specially for Multi-copter, throttle respond fast;
• Suit for throttle, which can compatible well with motor;
• Throttle signal is twisted pair cable, reduce the signal crosstalk effectively while transmission in the copper wire to flight more stable; 
• New miniaturization and ultra-low resistance MOSFET, powerful flow resistance, and professional MOS Drive chips to improve efficiency. PCB board processed with special thickness treatment, low resistance and calorific value, higher impact resistance.
• Subminiaturization design, 10/20A with high performance filtering capacitor on the board to reduce the weight.
• Support refresh rate of throttle signal maximum up to 500Hz, compatible with all flight controls; Support ultra-high speed Oneshot125 and 3000Hz high refresh rate, fast response, better throttle liner and smooth shooting to be the first choice for multicopter and racing frame. 
• Throttle lever travel and other settings are available to be set by USB linker; Support two-way mode and 3D mode for racing frame.

Package Included:

• 1 x ESC